Hesco would
like to thank all of our customers by inviting you to
our Customer Appreciation Day. This is a great opportunity
for our employees and customers to get together and enjoy
a cookout in our front parking lot. Look for more
information to follow in the coming weeks with the date,
times and directions.
We hope you
have a few free minutes to stop in and say hello, and
let us thank you personally for your continued business
and support.
Woodhead's
Brad Power® Connection Systems Provide Flexible Solutions to NFPA-79-200
Woodhead announces the release of Brad Power connection systems
for power distribution. Recent changes to NFPA 79-2002 allow the
use of factory applied connectors molded onto cables for line
voltage, communications and low-voltage industrial machinery applications.
Brad Power products are modular, flexible, scaleable and code-compliant
quick-connect wiring solutions that offer lower installed cost
and faster commissioning of industrial machinery.
Brad Power products are pre-wired connectors designed for harsh
demanding industrial environments and feature an over-molded connector
head that provide industrial ratings of NEMA 6P and IP67. Using
Brad Power connections systems help eliminate the concern and
downtime associated with mis-wiring and are UL 1977 recognized.
TB
SERIES Industrial Control Transformers from ACME
Acme's TB Series Industrial Control Transformers are especially
designed to accommodate the momentary current inrush caused
when electromagnetic components are energized... without sacrificing
secondary voltage stability beyond practical limits.
Acme's TB Series transformers are dry-type, step-down transformers
with the secondary control circuit isolated from the primary
line circuit to assure maximum safety.
Voltage regulation of Acme's TB Series transformers exceeds
standards recommended by the National Electrical Manufacturers
Association. Secondary circuit voltage drop between no-load
and momentary overload remains exceptionally low. This excellent
secondary circuit voltage regulation assures reliable operation
of electromagnetic components and may permit the use of a smaller
and less expensive industrial control transformer.
Killark's
Quantum® EXB Series Bolted Enclosures/Junction Boxes
35 available sizes (6"x 6" x
4" through 24"x 36"x 10")
Fewer cover bolts than on competitive
models
Gasketed flange, with "O"
ring gasket located inside bolt circle to prevent water seeping
into enclosure
Viewing windows, control operator
handle mechanisms and internal electrical devices included
in certification
Global applications: ATEX Compliant,
plus NEMA 3, 4, 4X Rated
Enclosures
Automation Fair 2005 in St. Louis
Every year the Allen-Bradley Automation
Fair is the largest single exposition of automation hardware,
software, services and support in North America. With
over 50 technical sessions, 20 hands-on labs and
more than 100 exhibitors, the Automation Fair is a fantastic
educational experience for professionals at all levels.
Please save the dates of November
16-17, 2005 and join us at the America's Center in St. Louis,
Missouri.
For more information ask your HESCO
or Rockwell Automation Salesman or visit: www.automationfair.com.
Area
access control (AAC)
The AAC photoelectric safety switch is a single-beam,
noncontact presence sensing safety device consisting of
separate transmitter and receiver units. The light beam
produced between the transmitter and receiver provides
access protection for hazardous areas. It offers safety
relay outputs and operates on either 110V AC or 24V DC.
These
versatile heat exchangers, whose streamlined design makes
them a natural choice for narrow or shallow enclosures,
are now offered in an expanded range of sizes. These redesigned
units are available with efficiencies from 4 W/°F air
in to 84 W/°F air in. They are well suited for enclosures
installed in air-conditioned production facilities where
UL type 12 protection is still required
Terminals. Cable
ties. Cable trays. Tools. And thousands of other electrical
wire and conduit termination/management products. All
designed to save installation time. And all available
from the company behind the industry’s most trusted
brands-
Whether you’re stocking a crib program or using advanced
JIT procurement, specifying Thomas & Betts products
can help you reduce inventory and handling costs now, and
help you save installation time.
SW Series Superwatt 2.0 is designed to deliver comfortable,
high efficiency illumination for both vertical as well as
horizontal surfaces. With its 2.2:1 spacing to mounting
height ratio, it is well suited for low and medium mounting
height applications like machine shops, assembly areas,
aisle lighting and areas requiring three dimensional, high
illumination. Unique Photometric Distribution 27% uplight
softens the brightness difference between luminaire and
surrounding areas. The maximum downward candlepower is projected
at 45° from vertical for wide distribution and the greatly
reduced candlepower above 65° minimizes direct glare. More
information
LS6 Self-Laminating Labels
Designed to identify all sizes of wires
and cables quickly and economically
Overlaminate protects legend for clear,
permanent identification
Vinyl material for indoor applications
White print-on area
Print with LS6-RWBLK wax ribbon
More
information
O-Z/Gedney
Malleable Iron Liquidtight Fittings
Most
user-friendly fitting in the industry. . Slim profile
for close proximity installation .. High strength malleable
iron construction withstands the extremes of heavy
industrial applications. Course thread gland nut allows
easy assembly and secure installation. Reversible captive
gland nut sealing ring; never a backwards installation.
Reusable ferrule with inspection port; no guesswork. All
fittings include locknut and sealing ring on the box side.
Available with or without insulated throat
Ferraz Shawmut
ULTRASAFETM modular 24, 48 and 600 volt Fuse Holders introduce
a new level of safety for Class CC (USCC) and Midget 1-1/2"
x 13/32" (USM) as well as DC rated fuses up to 30
amperes. ULTRASAFEholders qualify as "finger safe"
under IEC and DIN standards to an IP2 grade of protection,
including fuse changing (with the flick of a finger).
ULTRASAFE holders
are available in 1, 2, 3 or 4 poles, with or without blown-fuse
indicators in each pole. AC indicators are orange and
DC
are red. The multi-pole units can also be made up by ordering
pin-tie handles for field assembly. ULTRASAFE holders
save up to 15% mounting space and any combination can
be snapped onto 35mm DIN rail for extra savings in panel
building time. ULTRASAFE holders with Class CC fuses chosen
for Type "2" protection give one of the safest
protection packages in the industry. Ultrasafe body material
is tough and durable polyamide, with exceptional insulating
properties. For
more information on the UltraSafe Modular Fuse Holder
DIN Rail Utility Box
A labor saving way to provide
utility power to any control cabinet
Installing
the DIN Rail Utility Box is as easy as snapping
the box onto a 35mm DIN Rail and connecting the
line, neutral and ground wires to the terminal block.
Utility power for fans, lights, laptop computers,
testers or any other need is now at your disposal.
If load limiting is a concern, Hubbell's "CB"
version comes with a 5 Amp circuit breaker that
provides over-current protection to make sure large
loads are not drawn from the DIN Rail Utility Box.
All Hubbell DIN Rail Utility Boxes may be mounted
either vertically or horizontally on the DIN Rail;
the "H" version comes with the terminal
block mounted for easy wiring when the DIN Rail
Utility Box is mounted horizontally.
Acme's TB Series Industrial Control Transformers are especially
designed to accommodate the momentary current inrush caused
when electromagnetic components are energized... without sacrificing
secondary voltage stability beyond practical limits.
Designed to identify all sizes of wires
and cables quickly and economically
