|
|
| April |
| 1. |
FLEX I/O Modules From AB-PLC/EOI/Ind.Comp |
| 2. |
WEATHERFLO Provides an Off-the-Shelf Drive Enclosure Solution for HVAC Integrators |
| 3. |
Hubbell Metal Raceway |
| 4. |
Distribution and Control Transformers From Acme - Dry Type |
| 5. |
Spectrum Controls Universal Analog I/O |
| 6. |
Ferraz-Shawmut's new Smart Spot |
| 7. |
EY SERIES - SEALING FITTINGS from Killark |
| 8. |
HSTTA Heat Shrink From Panduit |
| 9. |
Philips Energy Advantage Long Life 28W T8 |
| 10. |
Yellow 77 Wire Pulling Lubricant from Ideal Industries |
|
| April Edition 2007 |
|
NOW IN STOCK AT HESCO:
Hoffman Modular Type 12 Enclosures for Flange-Mounted Disconnects in 84x78x24 size, gangable up to five doors,complete with sub panels and end plates. CLICK FOR MORE DETAILS
ACME 30, 50,75 and 112.5 KVA Dry Type Transformers that meet the new Energy Star Regulations (Multi-Tap Delta Primary and “Y” Secondary transformers).
|
|
|
|
| Register Now for Complete Automation on the Move |
|
Because of high demand, four extra hands-on lab sessions have been added:
PowerFlex 4 / 40 General Programming
NEW SESSION: May 9th, 7:30am - 9:30am
Become familiar with the PowerFlex Component Class drive family (PowerFlex 4 and 40). Learn how to make Component Class drives control motor speed. Become familiar with the keypad controls and status indicators. Display and manipulate the drive’s parameter data. Become familiar with DriveExplorer and DriveExecutive software. Connect to a PowerFlex drive using the software. Explore the various views and use the Control Bar to control the drive. Use one of the new Wizards. Utilize the upload, download and compare utilities.
PowerFlex 70 /700 General Programming
NEW SESSION: May 10th, 7:30am - 9:30am
Become familiar with the PowerFlex Architecture Class drive family (PowerFlex 70 and 700). Learn how to make Architecture Class drives control motor speed. Become familiar with the Human Interface Module (HIM) and status indicators. Display and manipulate the drive’s parameter data. Configure the drive and its I/O. Become familiar with DriveExplorer and DriveExecutive software. Connect to a PowerFlex drive using the software. Explore the various views and use the Control Bar to control the drive. Use one of the new Wizards. Utilize the upload, download and compare utilities.
PLC Basics - ML 1100
NEW SESSION: May 10th, 3:30-5:30
Learn to create, monitor, and control a basic PLC application using a MicroLogix 1100 controller and RSLogix 500 programming software. See how the embedded EtherNet/IP, online editing and LCD screen can be applied in your own application.
Introduction to Logix - ControlLogix and CompactLogix
NEW SESSION: May 9th & 10th, 3:30pm - 5:30pm
At the end of this lab you should understand how to develop a basic Logix application. Tasks include: Laying out memory, configuring I/O, writing logic, testing logic
Register Now! Class space is very limited.
www.rockwellautomation.com/events/boston
|
|
|
| Price Increases |
| PRICE INCREASES |
|
|
|
|
| EFFECTIVE IMMEDIATELY |
|
|
| Lithonia Lighting |
Approximately 6% |
|
|
|
|
| APRIL 30TH |
|
|
| Hoffman - Stainless Steel Products |
Approximately 9.6% |
|
|
|
|
| MAY 1ST |
|
|
| Adalet |
Approximately 6% |
|
|
|
|
FLEX I/O Modules
|
 |
• Modularity of network adapter, I/O, and the backplane means one I/O product line can fit your needs.
• Compact design of hardware results in smaller cabinets versus rack- based I/O.
• Locating I/O near sensors and actuators eliminates long wiring runs, reduces terminations per point, and decreases engineering and
installation time.
• Removal and Insertion Under Power (RIUP) of any FLEX I/O module without disruption of any other modules makes it possible to replace or add a module while keeping the rest of the system running, reducing downtime. More Information |
 |
|
|
|
WEATHERFLO Provides an Off-the-Shelf Drive Enclosure Solution for HVAC Integrators |
|
This enclosure has a thermostatically controlled forced-air ventilation system for cooling drives or other high-heat producing control equipment in applications that require outdoor protection.
Features:
• Six sizes with factory-installed fan and filter (115 VAC) for an active cooling ventilation system that is sized with airflow designed for the drive’s nominal horsepower ratings. Customers don’t have to evaluate airflow requirements and modify the enclosure to install fan, filter, and vents.
• Terminal power connection with inline thermostat so the fan only operates when the temperature exceeds the set point.
• Easy access, washable expanded metal filter
• Top front hood exhaust and door intake minimize footprint. The top also serves as a solar shield virtually eliminating the solar load.
• Lift-off hinged door for easy door-mount component cutout configuration
• Largest two sizes constructed of aluminum to provide an approximately 100-pound weight reduction |
More Information |
|
|
|
|
|
Distribution and Control Transformers
- Dry Type |
 |
Dry type distribution transformers
• Single and three phase, .05kVA thru 1000kVA
• Encapsulated and ventilated (air cooled) designs
• Units for harsh environments
• Many primary and secondary voltage combinations
• Copper wound core and coil designs available
• U.L. listed and CSA certified for indoor or outdoor use
 |
 |
|
|
|
| Universal Analog I/O |
 |
• 1746 SLC 500
• 1756 ControlLogix
• 1769 Compact I/O
1746sc-NI8u
8 Channels of Universal Analog Input RTD, Thermocouple, Voltage, Resistance or Current (Maximum of 4 RTDs)
1756sc-IF8u
Preferred choice for temperature sensing.
• Selectable thermocouple, voltage, current, RTD, and resistance.
• Highest density, lowest cost.
• Seamless integration and easy configuration.
1769sc-IF8u
High density and flexible—mix five input types. Channel selectable thermocouple, voltage, current, RTD and resistance.
• Eight individually configurable channels.
• Easily configured by ladder register settings and on-board jumpers. |
More information |
|
|
|
| With Ferraz-Shawmut's new Smart Spot finding an open fuse has never been easier. |
 Speed up Fuse replacement and avoid guesswork. A unique, solid-body design and advanced material technology senses when a fuse opens, then turns from silver to eye-catching red.
The SmartSpot offers contractors, MROs, and electrical industry professionals a convenient and cost-effective means of quickly and safely locating and replacing open fuses. SmartSpot activates a bright red spot to prominently and permanently indicate that the fuse is open. And unlike competitive products, Ferraz Shawmut’s SmartSpot maintains the fuse’s existing structural integrity — boasting unimpeded performance with the benefit of enhanced capabilities .
More Information |
|
|
|
EY SERIES - SEALING FITTINGS |
|
The purpose of seals in a Class I hazardous location is to minimize the passage of gases and vapors and prevent the passage of flames from one electrical installation to another through the conduit system. Seals are required to be installed within 18 inches on any conduit run entering an enclosure
which contains devices that may produce arcs, sparks, or high temperature.
Where two enclosures are connected by a run of conduit not over 3 ft. long, a single seal located at the center of the run is considered satisfactory. Only explosionproof unions, couplings, elbows, and conduit bodies similar to “L”, “T”, and “X” type shall be permitted between the sealing fitting and the enclosure.
More Information |
|
|
|
|
| HSTTA Heat Shrink |
|
• For damp locations
• Flexible tubing with an adhesive inner wall which seals and protects components from moisture and corrosion
• The 3:1 shrink ratio is a benefit when working with connector-to-cable transitions
• Material Type: Polyolefin Cross-Linked with adhesive • Shrink Ratio: 3:1
• Temperature Range: -67°F to 230°F (-55°C to 110°C)
• Flammabiltiy: Outer wall flame retardant
• Voltage Rating: 600V
More information |
|
|
|
|
Philips Energy Advantage Long Life 28W T8
featuring ALTO® Lamp Technology |
 |
Energy Savings, Long Life, Environmentally-Responsible Lamps
• Long Life
–30,000 hours rated average life1 at 12 hours per start
–36,000 hours rated average life at 12 hours per start when operated with Optanium Programmed Start ballast
• 28 Watt T8 Lamp vs. Standard F32T8 Lamp
–Save 4 watts per lamp instantly and up to 15% in energy costs
–Save $12.00 in energy costs over the rated average lamp life
More Information |
 |
|
|
|
Yellow 77® Wire Pulling Lubricant
from Ideal Industries |
 |
- Wax-based formula provides superior lubricity
- Safe to use with most cable types except low-density polyethylene and semi-conducting jackets
- Won't break down or separate after repeated exposure to freezing temperatures
- Dries to a thin, non-conductive film that won't clog conduit
- Clings to cable throughout long pulls
- Easy to apply by hand or with pump
- Creamy texture applies easily and uniformly
- Homogeneous blend requires no mixing
- Won't dry out—surface coat forms to control evaporation
- Environmentally safe—non-toxic, non-flammable and non-corrosive
More information |
|
|
|
You are receiving this E-mail as a customer of HESCO. If you would prefer not to receive further promotional e-mails please unsubscribe.
HESCO ● Inwood Business Park ● 30 Inwood Road – Suite One ● Rocky Hill, CT 06067 ●(860) 236-6363
● Fax (860) 236-0233 |
|
|
